AbovEdge
VP-0808
Intelligent VoIP Gateway with Built-In
NAT Traversal and Proxy Server
AboveEdge
VP series is a concise VoIP Switch. Besides its basic VoIP
Gateway function, its greatest feature is its built-in Proxy
and Relay, which can not only support registration and authentication
for various CPE devices, but also can solve the problem
of multi-net communication of CPE devices. AboveEdge VP
can help the users upgrade their legacy PBX and make it
support VoIP application in a short time, and realize expandable
application of IP extensions.
The
built-in IVR function and intelligent routing capabilities
makes it an ideal product for businesses to fulfill leading
telecommunications and business requirements without changing
their dialing habits.
Main
applications:
- Expand
extensions without adding extension cards.
-
Upgrade the PBX, providing VoIP features to legacy PBX.
-
Support multi-net remote IP extension.
- Work
with Co companies/ITSP for international calls and cell
phone calls saving
-
Work with TeleSynergy’s TelePCX to extend PBX feature
of TelePCX to remote site.
FEATURES
- Conforms
to IETF latest SIP protocol RFC-3261
- With
built-in Registrar Server, support user registration,
authentication and call authorization
- With
B2BUA, provide routing distribution and call control
- Support
various SIP customer endpoints such as IP-Phone, Softphone,
SIP adapter, Wi-Fi phone and VoIP Gateway, etc.
- Support
multi-account and registration to multi-Proxy server.
- FXO
port will automatically off hook when the corresponding
FXS port is occupied.
- Provide
NAT traversal of CPE end; no troublesome setting for VoIP
CPE. You can easily connect the network whether you are
in WAN or LAN, fixed or dynamic IP environment.
- Intelligent
Routing Management:
- Backup
route: second route alternative when the network is
unconnected
- Routing
by time section: you can set a special routing for
a special time
- Route
screen: according to inbound IP address or ANI, sift
the group for special arrangement.
-
Call Incoming Management
-
Hotline mode
- DNI/ANI
re-dialing by dial tone or IVR
- Support
E.164 coding mode
- Support
IP-to-PSTN, PSTN-to-IP and IP-to-IP application
- T
type architecture support ”Trunk Bypass”,
when power off, FXO connect with FXS directly, remaining
the usual communication of trunk.
- Support
check caution affair through Syslog Server and call detail
record (CDR)
- Support
TeleSynergy Billing solution (optional), provide various
billing solution, account information and call control
- Remote
management through Web-base user port:
- On-line
system parameter modification
- On-line
system supervision and management
-
Firmware upgrade
- Support
Caller ID identification (FXS: DTMF and FSK Caller ID
generation / FXO: DTMF and FSK Caller ID detection )
- Support
Polarity Reverse (FXS- generation / FXO- detection)
- Fax
message auto-detection ( support T.38 online fax protocol
)
- Support
QoS (IP TOS)
- Support
100 CPE user to sign in, and 50 On-line calls for one
box
- Support
8 multi-net concurrent call for one box
|
TECHNICAL
SPECIFICATIONS
- Communication
protocol
-
SIP (RFC 3261) compliant
- SIP
RFC2833 DTMF signaling
-
Voice algorithms: ITU G.711µ-law/A-law at 64kbps,
G.723.1 at 5.3/6.3kbps, G.729A at 8kbps, auto codec negotiation
- Echo
Cancellation: G.168-2000 compliant with 40ms echo tail
length.
- VAD(Voice
Activity Detection) & CNG(Comfort Noise Generation):
G.723.1A for G.723.1, G.729B for G.729A
- Fax
protocol: T.38 FAX relay supports Group III V.17, V.21,
V.27ter, V.29, V.33 (2.4 to 14.4 Kbps)
- Quality
Enhancement: Jitter Buffer and Programmable Gain Control
- Tone
Generation and Detection: DTMF
- Call
Progress Detection: Dial tone, Busy tone, Ring Back tone
- Physical
port number: 16 ports (8 FXO / 8 FXS)
- AbovEdge-VP-0808:8
FXO / 8 FXS / 8 VoIP channel
- Trunk
interface
- Loop
start
- Loop
voltage polarity reverse detection
- Loop
current: 20~80mA,Polarity insensitive
- Interface
impedance:600 ohms
- Frequency
response: 200~3400Hz
- Ring
detection: 30Vrms~140Vrms (16~68Hz )
- Pulse
dialing: 10/20 PPS,M/B ratio 33/66, 40/60 selectable
- Caller
ID receiving: Bellcore GR-30-CORE & DTMF
- Ring
detection: Onhook / offhook control
- Connector:
2 port RJ-45
-
Extension interface
- Loop
start
- Loop
Range :0~200 ohms
- DC
Supply: 50v (standby)
- Loop
current: 25mA
- Interface
impedance:600 ohms
- Frequency
response: 200~3400Hz
- Ringing:
44Vrms (20Hz) / 60mA
- Caller
ID generating: Bellcore GR-30-CORE / DTMF
- Message
light: Bellcore FSD 01-02-2000
- Pickup/Hangup/Flash
detection; Flash duration selection
- Connector:
2 port RJ-45
- Managing
tool: Web Browser, Telnet and Console Port, syslog
- Firmware
upgrade: FTP / TFTP / Provision Server
- Network
interface: 2Fast Ethernet port (10/100 Base-T) auto-detection
- Connector:
2RJ-45 (1WAN, 1LAN)
- QoS:Support
IP TOS (Type of Service)
- Input
Voltage,Frequency:AC 90V~240V, 50~60 Hz
- Power
consumption:70W(max.)
- Input
Inrush Current 30A at 115Vac ,60A at 230Vac (max.)
- Operating
Temperature: 0°C
to 45°C
- Storage
Temperature: -20°C
to 75°C
- Humidity:
20% to 90% non-condensing
- Dimension:
438mm×173mm×44mm(W/D/H)
-
Weight: net weight 2.8kg, gross weight 3.8kg
|